Here is why Titanium easy-flux 125 amp welder is the right fit for you
The TITANIUM™ Easy-Flux 125 Amp Welder can be available very easily and you can find it near you. This means it is easily accessible. This welder is light in weight, therefore it is an easy-to-use one. You can use it at home or you can use it professionally.
The weight is light because it must be approximately 15 lbs which is much better than 50 pounds that makes the carrying around much easier. Portability is definitely a great factor in buying a welder. Something that is not as heavy can be easy to carry from room to room. There is advancement in technology which gives the favour of a stable arc that is more stable and also provides welds that are much cleaner. Transformer based machines will not offer these qualities with a weight that is 50% lesser.
Does Titanium easy-flux 125 amp welder have any safety measures?
Yes surely Titanium easy-flux 125 amp welder has safety measures and features that are in fact very modern. The likes of cold start fire feeding and overload protection are included. You do not have to keep worrying about the machine in fact you can give full attention to the job. Contact tops, welder and gun package and nozzles should be included.
What are the great features of Titanium easy-flux 125 amp welder?
These are some of the great features of Titanium easy-flux 125 amp welder.
- Easily accessible.
- Easy to use.
- The weight is light.
- Stable arc
- Cleaner welds
- Safety measures are way advanced
- Thermal overload protection
- cold start wire feeding
- Variable Control for fine-tuned welding
- Wire feeder and gun package
Which safety measurements should you take alongside?
- Welding helmet (I recommend an inexpensive auto-darkening helmetto start with)
- Safety glasses
- Welding gloves
- Welding jacket
- Welding cap or baseball cap worn backwards
- Steel toed boots is a good idea too!
Welding Accessories that you may require
To start off you will need some good welding pants. You will also need mild steel scraps for the purpose of practice. You will need a chip hammer to remove the dirty and clean the welds. The C clamps are a must in order to hold the work pieces. You will need a nozzle gel to ensure that the life of contact tips remain longer than usual. You need a metal gauges set to see the thick intensity that you work on. You will also need a wire brush. A drill will be needed, if not that then a rotary grinder would be needed. Metal is not easy to scrap off. You need cutters as well. As an option, you might consider some anti-spatter spray to help prevent the flux-core spatter from sticking to your work.
A good welding machine would be something you definitely need to invest on. Investment should always be done in the right place and that is when you get the right value for the money. Good luck with that!